POWER ENGINEERING (CHAPTER 3B)

Test

Parties jouées 0

Créer une copie

À propos de cette activité

MIDTERM EXAMINATION 4384208

Créé par

Grace Balahay

United States

Téléchargez la version pour jouer sur papier

Top 10 résultats

Il n'y a toujours pas de résultats pour ce jeu. Soyez le premier à apparaître dans le classement! Connectez-vous pour vous identifier.

Créez votre propre jeu gratuite à partir de notre créateur de jeu

Affrontez vos amis pour voir qui obtient le meilleur score dans ce jeu

Créer un défi

		%
	Anonyme	%
		%
		%

Imprimez votre jeu

POWER ENGINEERING (CHAPTER 3B)


POWER ENGINEERING (CHAPTER 3B)Version en ligne MIDTERM EXAMINATION 4384208 par Grace Balahay 1 is a device which when provided with fuel and air, produces rotary power Written answer 2 is the volume that a piston displaces in one stroke inside the cylinder. It is equal to the cross-sectional area of the piston multiplied by the length of the stoke Written answer 3 is the product of the piston displacement per cylinder and the number of cylinders Written answer 4 is an engine characteristics related to engine efficiency, that is, the ability of the engine to convert in the fuel to useful mechanical energy Written answer 5 is the volume of the space inside the cylinder above the piston when it is at the top dead center (tdc) position Written answer 6 is the ratio of the total volume inside the cylinder to the clearance volume Written answer 7 also known as the limited pressure or mixed cycle, trinkler cycle, seiliger cycle or sabathe cycle Written answer 8 is a thermal cycle that is a combination of the otto cycle and the diesel cycle, first introduced by russian-german engineer Gustav Trinkler Written answer 9 heat is added partly at constant volume and partly at constant pressure, the advantage of which is that more time is available for the fuel to completely combust Written answer 10 is presented which includes a combination of two engines different cycle pressure ratios. The two engines are cross connected by a common regenerator that enables low specific fuel consumption under partial load conditions. Written answer 11 was invented in 1982 by Kenneth W. Porter, P.E.M.S.A.E, of King Country, Washington. It operates on a modified Brayton cycle, but with continuous pulsed combustion, similar to that of a gas turbine. It can burn most commonly available hydrocarbon fuels and features the high compression ratio (14:1) typical of a Diesel cycle. Written answer 12 on the rear of the rotor connects to a layshaft spur gear and provides the output shaft drive to the connected load Written answer 13 enclosing the single combustion chamber, and its co-axial slotted sleeve carried by the rotating cylinder barrel. This feature enables the charging air to enter the combustion chamber and allows evacuation later of the products of combustion to the expander cylinder and pistons. Written answer 14 is a machine delivering power or thrust. It does this using a gaseous working fluid. Written answer 15 burns the fuel in a burner and delivers the resulting gas to the power section, where it spins the power turbine Written answer 16 consists of a compressor which has a rotor with a series of blades around its outer edge Written answer 17 is a heat engine developed by Wally Minto. The engine consist of a set of sealed chamber arranged in a circle, with each chamber connected to the chamber opposite to it. Written answer 18 operates on a small temperature gradient, and produces a large amount of torque, but at very rotational speed Written answer 19 is a heat engine operating by cyclic compression and expansion of air or gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work Written answer 20 is traditionally classified as an external combustion engine, as all heat transfer to and from the working fluid take place through the engine wall Written answer 21 is a type of internal combustion engine using a rotary design to convert pressure into a rotating motion instead of using reciprocating pistons. Written answer 22 invented wankel engine Written answer 23 For gasoline engines, is classified as a highly-combustible fuel together with high octane gasoline Written answer 24 for diesel engine, is classified as less combustible together with bunker fuel and kerosene Written answer 25 from the fuel tank, the gasoline passes through the _____ where gasoline is mixed with air before it enters the cylinder via the inlet valve Written answer 26 in diesel engine, the gasoline passes through the ______ where it is pressurized before entering the cylinder via the fuel injector nozzle Written answer 27 compression ratio of diesel engine Written answer 28 compression ratio of gasoline engine Written answer 29 invented britalus rotary engine Written answer 30 invented the minto wheel Written answer 31 built the first engine Written answer

POWER ENGINEERING (CHAPTER 3B)

Test

À propos de cette activité

Créé par

Téléchargez la version pour jouer sur papier

Top Jeux

Test

UPS 5 Seeing Habits Quiz

Test

Spanish Alphabet Listening

Test

Practice Quiz - Punnett Square, Variation, and Mutations

Test

Tissues - Practice Quiz

Test

Photosynthesis vs Cellular Respiration - Practice Quiz

POWER ENGINEERING (CHAPTER 3B)Version en ligne

par Grace Balahay

is a device which when provided with fuel and air, produces rotary power

is the volume that a piston displaces in one stroke inside the cylinder. It is equal to the cross-sectional area of the piston multiplied by the length of the stoke

is the product of the piston displacement per cylinder and the number of cylinders

is an engine characteristics related to engine efficiency, that is, the ability of the engine to convert in the fuel to useful mechanical energy

is the volume of the space inside the cylinder above the piston when it is at the top dead center (tdc) position

is the ratio of the total volume inside the cylinder to the clearance volume

also known as the limited pressure or mixed cycle, trinkler cycle, seiliger cycle or sabathe cycle

is a thermal cycle that is a combination of the otto cycle and the diesel cycle, first introduced by russian-german engineer Gustav Trinkler

heat is added partly at constant volume and partly at constant pressure, the advantage of which is that more time is available for the fuel to completely combust

is presented which includes a combination of two engines different cycle pressure ratios. The two engines are cross connected by a common regenerator that enables low specific fuel consumption under partial load conditions.

on the rear of the rotor connects to a layshaft spur gear and provides the output shaft drive to the connected load

enclosing the single combustion chamber, and its co-axial slotted sleeve carried by the rotating cylinder barrel. This feature enables the charging air to enter the combustion chamber and allows evacuation later of the products of combustion to the expander cylinder and pistons.

is a machine delivering power or thrust. It does this using a gaseous working fluid.

burns the fuel in a burner and delivers the resulting gas to the power section, where it spins the power turbine

consists of a compressor which has a rotor with a series of blades around its outer edge

is a heat engine developed by Wally Minto. The engine consist of a set of sealed chamber arranged in a circle, with each chamber connected to the chamber opposite to it.

operates on a small temperature gradient, and produces a large amount of torque, but at very rotational speed

is a heat engine operating by cyclic compression and expansion of air or gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work

is traditionally classified as an external combustion engine, as all heat transfer to and from the working fluid take place through the engine wall

is a type of internal combustion engine using a rotary design to convert pressure into a rotating motion instead of using reciprocating pistons.

invented wankel engine

For gasoline engines, is classified as a highly-combustible fuel together with high octane gasoline

for diesel engine, is classified as less combustible together with bunker fuel and kerosene

from the fuel tank, the gasoline passes through the _____ where gasoline is mixed with air before it enters the cylinder via the inlet valve

in diesel engine, the gasoline passes through the ______ where it is pressurized before entering the cylinder via the fuel injector nozzle

compression ratio of diesel engine

compression ratio of gasoline engine

invented britalus rotary engine

invented the minto wheel

built the first engine