Relier Pairs Microscope MatchingVersion en ligne assignment par Benjamin D Morgan 1 The eyepiece 2 Stage 3 This should be used to focus under high power. 4 Cover Slip 5 This should ONLY be used under low power magnification/objective. If you use this under high power then you can crack the lens or slide. 6 The diaphragm that adjusts the amount of light 7 Glass Slide 8 How to focus the microscope on medium and high power 9 Revolving nosepiece 10 Grab from here to move the microscope safely 11 Controlled Variable 12 Body Tube 13 Independent Variable 14 Objective Lens 15 Dependent Variable 16 This protects the slide so it doesn't fall and break. 17 how to focus the micoscope on low power Variable that is changed in an experiment. The cause Variable that is measured in an experiment. The effect start with the stage at its lowest setting. Make sure the low power lens is being used. Make sure its turned on and light is on. Using the course adjustment knob, slowing raise the base until the picture is in view. Use the fine adjustment knob to bring the specimen into focus. If this does not work rotate back out to the low power lens and refocus. Then return to medium/high power. Variable that is kept the same in an experiment that might otherwise effect the results.
Créer jeu